Double Glazing Window Repair
Over time double glazing may create problems, such as being difficult to open windows or doors that is snagged. Fortunately, these issues can be resolved easily.
Many homeowners will attempt to solve these issues on their own but this should be left to professionals. Trying to do this without the proper tools and knowledge can result in damage.
Broken Panes
A damaged window can be a stressful and inconvenient issue. It could let hot or cold air in your home, and leave a gap that allows moisture or debris to get into. This could also affect your energy efficiency as your AC or furnace will need to work harder in order to keep your home comfortable. It is possible, dependent on the weather conditions and whether your windows are single-paned or double-paned, to repair the damage temporarily by applying silicone sealant. A permanent fix requires professional assistance.
Tape with a high-performance adhesive can be used to repair a cracked window. A piece of tape can be placed over the crack to stop it from getting worse. A crack that is large enough to penetrate the glass or is too big to cover with tape, must be replaced completely.
The excitement of your pet when you open the door could cause broken glass. The frames of your window could move over time and break the plastic that holds the glass sheets in place.
Wear thick work gloves when you have a broken pane of glass. Put a cardboard container near the pane to catch any fragments. Take the sash off and work on a level surface, like the table. Wear a mask to ensure not to breathe in the glass shattering.
After removing the old glass, clean any paint and varnish from the window frame. You can also use a heating gun to soften any old glazing putty and metal glazing points that were used to hold the glass in place.
You can then take measurements of the opening to make a new glass. To allow for expansion and contraction you should always purchase a replacement glass that is slightly smaller than the opening. You can ask your local hardware store or your home center cut it to these measurements.
Put the glass in the frame. Fill any gaps with silicone caulk. It is available in a home improvement store. Smooth the caulk with a putty blade. Add glazier's points to corners of the glass frame every six inches, so that they keep the pane in place.
Condensation
If your double glazing windows are old or brand new it's quite common for them to experience condensation. This is particularly true in winter, when colder air meets warm glass. It could be a problem however it's not usually an issue. This is because condensation on windows indicates that your double glazing is working correctly.
It can be an indication that your seal is failing and moisture is leaking through the gap. If you notice a milky appearance on your window, or if you notice that water beads appear across the surface, it needs to be addressed to prevent mold, mildew, or any further damage.
Condensation can be easily removed. A technician will drill tiny holes into the window's frame to allow the trapped moisture to escape. This process is called defogging. It can also be used to eliminate staining caused by trapped moisture.
Defrogging doesn't fix the root cause of a damaged window seal. It could be ineffective even if the condensation has disappeared as the air that is leaking between the panes may remain. This could mean you are not getting the heat insulation as you would like from your windows.
If you have noticed moisture build-up in your windows, it's a good idea to speak with an expert as quickly as you can to determine what the next steps should be. They may recommend solutions such as adding vents in the windows that allow fresh air to enter but do not allow warm air to escape.
The last thing you want is for your double-glazed unit to break down, especially when this can be costly to replace. With the right skills, equipment and experience, you can repair your double glazing to keep it in good shape for a long time. Contact us today if you need double glazing repairs. We provide a wide range of services including replacing one or more panes glass to installing energy-efficient upgrades.
Leaks
Leaks can cause damage and can be costly to repair. It's costly to fix, and it's often a sign that your property has other problems such as mould or dry rot. It's crucial to fix the leak as soon as you can.
If you notice that your double-glazed windows are draughty It is likely that the seal has been damaged. It could also mean that the gas used to encase the glass panes has been taken away. A specialist technician can reseal your window to solve this issue.
Sometimes dirt can cause a double-glazed window to become cloudy or misty. This is typically a sign that the seal is getting worn out and the glass should be cleaned. A specialist can do this by using high-pressure water jets to swiftly clean the glass.
However, if condensation is beginning to form between the two glass panes in your double glazing, it is a sign that the seal has sprung to leak and that there is no argon between the panes of glass. This is a serious issue and suggests that your double glazing does not insulate your home as well as it should. The glass unit can be replaced, but you will need to do it sooner rather than later due to the performance of your double glazed window has been affected.
If you own new double-glazed windows that are under guarantee, you should contact the company who installed them and report any issues with the units, or the sealing of the glass since it is unlikely to be covered under the warranty. You'll lose your warranty when you attempt to repair the units yourself or alter them. This is why we recommend using a specialist double glazing repair business.
Weather Damage
In areas with extreme weather, double-glazed windows require a sturdy frame that can hold the glass panes. Ice snow, high winds and violent double glazing repairs thunderstorms can damage your windows. If you see cracks, holes or dents in your windows, contact an expert for a double glazing repair.
If you notice that water is flowing out from the bottom of your window, this could indicate that there is a breach in the seal inside the window. This allows moisture to infiltrate your home. The uPVC window frame or aluminum window frames could also be bent or warped. To correct this, you will need to replace the window seal, and then insert it into the frame.
Window seals are used to ensure that double-glazed windows are airtight and stop heat from getting out of your home, as well as preventing condensation between the glass panes. These window seals are usually made of uPVC or aluminum and keep the glass in the right place. You can experience problems like energy loss and draughts when the window seals fail.
Misting windows are a frequent issue and are the result of the gas that insulates the double-glazed window deteriorating. The argon gases keep the glass in place, and form an airtight seal however, if it gets damaged or worn out, the gases could escape. The argon gas may cause condensation between glass panes when it escapes.
The problem can be solved by replacing the window seal, and then re-inserting glass. You can apply an anti-fogging treatment to prevent any further condensation. The best way to accomplish this is to call in an expert to complete the task for you.
While it is essential to have double-glazed windows, they aren't immune to abrasions and will need to be repaired at times. Most windows can be repaired without needing to replace them. It is best to have some basic tools available. You will need protective glove, a tape or film that is transparent, scotchtape, nail polish, and a plastic sheet.